Oakside Classic Clocks

Contents



British Flag English

German Flag Deutsch


Valid XHTML 1.0 Strict Valid CSS!


SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Kieninger Clock Movement Sets for Clock Makers who insist on the Best!

Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.

Kieninger Online Shop

The Clock Makers Sets illustrated on this page are assembled around a superb Kieninger mechanical clock movement. All clock makers sets include a dial, a gong, a winding key and the movement fixings and where appropriate, the set will also include a pendulum, the polished brass weight 'shells & fillings' and the cable pulleys. On the Sets 'Options & Prices' page Y

you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions.

On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!

Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!

CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.

If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.

There is also lots of interesting information on the Kieninger Manuals & Interesting Links page.

Plan 003 -- Granddaughter Clock

plan_003.jpg
Enlarge

Granddaughter Clock, Height 1524mm, Width 375mm, Depth 216mm. (Kieninger movement installation drawing included).

All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.

Set 12 featuring the Kieninger PS 055 Vienna movement

PS055

Pendulum length 65cm. Cable & Weight Drive.

Chimes the hours and 1/2 hour on a coiled gong.

THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger PS 055 - 65cm. Automatic Night Silencing.
  • Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
  • Pendulum: Timber shaft with a 140mm polished brass bob.
  • Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
  • Pulleys: Two brass pulleys.
  • Weight Shells: Two - 50mm x 160mm with small hooks
  • Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
  • Gongs: 133mm Coil gong Kieninger PS
  • Mounting: Casts Brass Mounting Bracket and fixing screws.
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 055 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £772.99 (EUR 860.65)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 12 Movement Dials and Pendulums images page.

Click here to view the Set 12 Options and Prices page.

Set 13 featuring the Kieninger PS 063 Vienna movement

PS063

Pendulum length 65cm. Cable & Weight Drive. Maintaining Power. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger PS 063 - 65cm. Automatic Night Silencing. Maintaining power
  • Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
  • Pendulum: Timber shaft with a 140mm polished brass bob.
  • Pulleys: Polished Brass Cable Pulley. PS
  • Weight Shells: Two - 50mm x 160mm with small hooks
  • Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
  • Gongs: 133mm Coil gong Kieninger PS
  • Mounting: Casts Brass Mounting Bracket and fixing screws.
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £796.98 (EUR 887.36)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 13 Movement Dials and Pendulums images page.

Click here to view the Set 13 Options and Prices page.

Set 13R featuring the Kieninger PS 063 Regulator movement

PS063R

Pendulum length 65cm. Cable & Weight Drive. Maintaining Power. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger PS 063 - 65cm. Automatic Night Silencing. Maintaining power
  • Dial: Oakside 200mm diameter white Regulator dial (including hands) with black Roman numerals, two subsidiary dials show the hours and seconds and finished with a brass rim.
  • Pendulum: Timber shaft with a 140mm polished brass bob.
  • Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
  • Pulleys: Polished Brass Cable Pulley. PS
  • Weight Shells: Two - 50mm x 160mm with small hooks
  • Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
  • Gongs: 133mm Coil gong Kieninger PS
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £829.99 (EUR 924.11)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 13R Movement Dials and Pendulums images page.

Click here to view the Set 13R Options and Prices page.

Set 15 featuring the Kieninger RWS 13 Vienna movement

RWS13

Pendulum length 65cm. Spring & Cable Weight Drive.

Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RWS 13 - 65cm.
  • Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
  • Pendulum: Timber shaft with a 140mm polished brass bob.
  • Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
  • Pulleys: Single yoke pulley.
  • Weight Shells: Two - 50mm x 120mm with large hooks
  • Shell Fillings: Two lead @ 2.0kg. 48mm x 120mm
  • Gongs: 8-rod gong - 430mm for RWS.
  • Mounting: Brass satin finish bracket.
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The RWS 13, 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm. The distance from the rear panel to the front face of the weight is approximately 120mm.

The Dial, Hands and Movement can be supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £885.64 (EUR 986.07)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 15 Movement Dials and Pendulums images page.

Click here to view the Set 15 Options and Prices page.

Set 20 featuring the Kieninger RK 014 movement

RK014

Pendulum length 80cm. Chain & Weight Drive. (Oakside special assembly order)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RK 80cm
  • Dial: Tempus 200 x 265mm Dial
  • Pendulum: Kieninger 80cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three - 50mm x 240mm with small hooks
  • Shell Fillings: Three @ 3.0kg.
  • Gongs: 8-rod gong - 680mm for RK 046.
  • Mounting: Movement fixing screws and plates

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, manual Night Silencing. The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

The movement requires a minimum measurement of 175mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £732.00 (EUR 815.01)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 20 Movement Dials and Pendulums images page.

Click here to view the Set 20 Options and Prices page.

| Oakside Clock Gallery | Kieninger Floor Clocks | Kieninger Month Running Clocks | Kieninger Table Clocks | Kieninger Wall Clocks | Hermle Month Regulators | Hermle Table Clocks | Hermle Wall Clocks | Altobel Antonio Italian Clocks | Clock Makers Plans | Kieninger Movement, Dial & Pendulum Sets | Kieninger Clock Movements | Dials, Pendulums, Accessories & Movement Repair Parts | Kieninger Manuals & Links | Clocks Built by Others | Home | About Us | Visit Showroom | Contact Oakside | Terms & Conditions | FAQ - I need help now!

Oakside's hours of business: Monday - Saturday, 10.00 to 18.00, Sunday 11.00 to 14.00.
(Our local time is now: ??:??)
Telephone 0118 9701 nine 85 (int. +44 118 9701 nine 85)
Copyright © Frank Redmile - Oakside Classic Clocks
Please read our Terms and Conditions