Oakside Classic Clocks

ADVANCE NOTICE
The Oakside office will be closed from December 16th 2017 until February 8th 2018 - all communications during this period must be via emails.
Kieninger Repair parts and Movement Sets etc will not be shipped during this period but clock orders will still be processed and delivered.

Contents



British Flag English

German Flag Deutsch


Valid XHTML 1.0 Strict Valid CSS!


SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Kieninger Clock Movement Sets for Clock Makers who insist on the Best!

Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.

Kieninger Online Shop

The Clock Makers Sets illustrated on this page are assembled around a superb Kieninger mechanical clock movement. All clock makers sets include a dial, a gong, a winding key and the movement fixings and where appropriate, the set will also include a pendulum, the polished brass weight 'shells & fillings' and the cable pulleys. On the Sets 'Options & Prices' page Y

you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions.

On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!

Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!

CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.

If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.

There is also lots of interesting information on the Kieninger Manuals & Interesting Links page.

Plan 041 -- Swedish Mora Floor Clock

plan_041.jpg
Enlarge

Swedish 18th century Mora Clock, Height 2032mm (excluding the spire), Width 660mm, Depth 330mm.

To ensure that the centre of the pendulum bob swings within the lower part of the glazed door you will require a 116cm movement with either a 116cm lyre pendulum or a 116cm temperature compensating pendulum.

Very comprehensive set of plans on nineteen 24 " by 36" sheets. The plans include full size patterns that can be traced onto your timber and for producing mdf templates to use with bearing guided routers blades to machine the shaped wood parts.

In addition, the plans includes fully dimensioned, construction detail drawings, a twenty A4 page fully illustrated assembly booklet and an eighteen page step by step written assembly instruction guide.

The drawing specifies bendable plywood for the curved panels - as an alternative Oakside can supply 6mm flexible MDF panels veneered in real Oak, Walnut and Cherry.

We also include a Kieninger movement installation drawing.

All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.

Set 36 featuring the Kieninger RWS 25 movement

RWS25

Pendulum length 116cm. Spring & Cable Drive. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RWS 25 - 116cm. Highly polished version
  • Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Single brass yoke pulley included.
  • Weight Shells: Two - 50mm x 160mm with small hooks
  • Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with large hooks
  • Gongs: 8-rod gong assembly - included.
  • Mounting: Brass SATIN finish movement support bracket. .
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

Our current stock of RWS 39 - 116cm movements have been specially assembled for Oakside by Kieninger. The highly polished movement ´front and rear plates´ were specially prepared under contract by Kieninger for a company called Sewills, who ceased trading a number of years ago. In addition to the standard AJK (Kieninger) logo and movement identification numbers the rear plate also has ´Sewills Estd 1800 ad - New Millenium - Limited Edition´ and 65cm, etched on it. During assembly for Oakside, Kieninger fitted all new internal parts to provide one second beating to ulse the 116cm Royal pendulum.

We can supply this set with a single pulley with one larger weight shell in place of the twin yoke pulley and twin weights

The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The RWS 39 116cm movement requires a clock cabinet with a minimum depth of 135mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 125mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £825.76 (EUR 942.52)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 36 Movement Dials and Pendulums images page.

Click here to view the Set 36 Options and Prices page.

Set 39 featuring the Kieninger RS 01 Vienna Dial movement

RS

Pendulum length 116cm Cable & Weight Drive. Maintaining Power.

Plays the Westminster melody on the quarters and chimes the hours, on an 8-rod gong.

THIS MOVEMENT SET IS IDEAL FOR LARGE LANTERNDLUHR STYLE VIENNA REGULATORS. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RS005 - 116cm. (Highly polished Version)
  • Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum: Lyre Pendulum with a 165mm polished brass bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three polished brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 50 x 180mm.
  • Shell Fillings: Strike 3.4kg, Time 3.4kg (4.5kg for heavy pendulums), Chime 3.4kg.
  • Gongs: 8-rod gong assembly - included.
  • Mounting: Brass SATIN finish bracket. .
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RS005 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RS005 movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.

The RS005 116cm movement requires a distance of 1070mm from the centre of the dial to the centre of the pendulum bob, a minimum case width of 285mm to accommodate a 200mm bob and a depth of 135mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,084.76 (EUR 1,238.15)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 39 Movement Dials and Pendulums images page.

Click here to view the Set 39 Options and Prices page.

Set 43 featuring the Kieninger SK 012 movement

SK012

Pendulum length 116cm. Chain & Weight Drive.

Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

THIS MOVEMENT SET IS IDEAL FOR YOUR FIRST GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger SK 012 - 116cm.
  • Dial: Square dial 200 x 200
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three 40mm x 245mm polished brass shells.
  • Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
  • Gongs: 8-rod gong assembly - Included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The SK 116cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.

This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.

The Timber pendulum (086) with a 165mm bob swings 210mm

The Lyre pendulum (095) with a 165mm bob swings 245mm

The Lyre pendulum (096) with a 220mm bob swings 270mm. The distance from the handshaft nut to the centre of the bob is 1040mm.

The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £606.49 (EUR 692.25)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 43 Movement Dials and Pendulums images page.

Click here to view the Set 43 Options and Prices page.

Set 44 featuring the Kieninger RK 047 Movement

RK047

Pendulum length 116cm. Chain & Weight Drive.

Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RK 047 - 116cm
  • Dial: Square dial 200 x 200
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Polished brass weight shell complete, 50 x 245mm.
  • Shell Fillings: Strike 3.0kg, Time 3.0kg, Chime 3.0kg.
  • Gongs: 8-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK 047 movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes.

The movement plays the Westminster melody on the quarters on four rods of the gong.

The movement strikes the hours on four rods of the gong.

Patented Kienirramic solid anchor Dead Beat Graham escapement

Automatic tick (beat adjustment).

Two levers allow selection of Continuose, Automatic Night Silencing or Silent for the Strike and Chime.

Handshaft protrusion (movement front plate to tip, 35.8mm.

The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.

For 8-day running the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.

When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £734.20 (EUR 838.02)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 44 Movement Dials and Pendulums images page.

Click here to view the Set 44 Options and Prices page.

Set 47 featuring the Kieninger KSU 50 movement

KSU50

Pendulum length 116cm. Cable & Weight Drive. Maintaining Power.

Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours on a twelve-rod gong.

THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger KSU 50 - 116cm
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 60 x 245mm.
  • Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
  • Gongs: 12-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 50, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,046.38 (EUR 1,194.34)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 47 Movement Dials and Pendulums images page.

Click here to view the Set 47 Options and Prices page.

Set 48 featuring the Kieninger KSU 63 movement

KSU63

Pendulum length 116cm. Cable & Weight Drive. Maintaining Power.

Plays the Westminster, Ava Maria & Ode to Joy melodies on the quarters and chime the hours, on a 16-rod gong.

THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger KSU 63 - 116cm.
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 60 x 245mm.
  • Shell Fillings: Strike 3.0kg, Time 3.0kg (4.0kg for heavy pendulums), Chime 4.0kg.
  • Gongs: 16-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 63, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for the Chimes and Melodies. The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing (between 10pm to 7-15am) or Continuous. The control that protrudes through the slot on the right side of the dial controls the three melodies - Westminster, Ave Maria (Schubert) and Freude schöner Götterfunke (ode to joy) and allows selection of Silent, any of the three Chimes or Continuous playing - The Hourly chimes and the Quartely melodies play on a 16-rod gong.

This movement set requires a minimum measurement of 250mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. A timber pendulum with a 165mm bob will swing 270mm. A large lyre pendulum with a 270mm bob will swing 355mm. The distance from the rear panel to the front face of the weight is approximately 220mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,237.11 (EUR 1,412.04)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 48 Movement Dials and Pendulums images page.

Click here to view the Set 48 Options and Prices page.

Set 49 featuring the Kieninger KSU 55 Nine Bells movement

KSU Bells

Pendulum length 116cm. Cable & Weight Drive. Maintaining Power.

Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours, on nine nested brass bells.

THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger KSU 55 Nine bells - PL 116cm.
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 60 x 245mm.
  • Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
  • Gongs: Nest of nine bells included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 55 movement strikes the hours and chimes three melodies - Westminster, Whittington & St. Michael on the quarters on a nest of nine brass bells.

The KSU 55, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or Selection off any off the three melodies

This movement set requires a minimum measurement of 195mm from the front of the hand shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

As an approximate guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,249.95 (EUR 1,426.69)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 49 Movement Dials and Pendulums images page.

Click here to view the Set 49 Options and Prices page.

Set 51 featuring the Kieninger HE Bell movement

HE Bell

Pendulum length 116cm. Chain & Weight Drive.

THIS MOVEMENT SET IS IDEAL IF YOU ARE BUILDING A TRADITIONAL GRANDFATHER CLOCK . (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: HE Single Bell - 116cm
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with black Roman numerals on a silver chapter ring. Cast spandrels.
  • Pendulum: Kieninger 116cm Brass Lyre Pendulum with a 225mm Brass Bob
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells:
  • Shell Fillings: Strike; 3.5kg. Time; 4.0kg
  • Gongs: 100mm diameter cast brass bell.
  • Mounting: Movement clamp bars
  • Plans:

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HE BELL, 116cm Pendulum Chain Movement specifications; Half hour Bim Bam striking on a single rear mounted 100mm cast bell.

Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,

This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Price including UK & Ireland delivery £1,153.16 (EUR 1,316.22)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 51 Movement Dials and Pendulums images page.

Click here to view the Set 51 Options and Prices page.

Set 52 featuring the Kieninger HE Gong movement

HE011

Pendulum length 116cm. Chain & Weight Drive.

THIS MOVEMENT SET IS IDEAL IF YOU ARE BUILDING A TRADITIONAL GRANDFATHER CLOCK . (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: HE 011 - 116cm
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with black Roman numerals on a silver chapter ring. Cast spandrels.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells:
  • Shell Fillings: Strike; 4.0kg.Time; 3.5kg
  • Gongs: 8-rod gong - 680mm for RK 046.
  • Mounting: Movement clamp bars
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HE 011, 116cm Pendulum Chain Movement specifications; Half hour Bim Bam striking on an eight-rod gong

Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,

This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Price including UK & Ireland delivery £1,153.16 (EUR 1,316.22)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 52 Movement Dials and Pendulums images page.

Click here to view the Set 52 Options and Prices page.

Set 53 featuring the Kieninger HSU 01 movement.

HSU01

Pendulum length 116cm. Cable & Weight Drive. Maintaining Power.

Plays the Westminster, Whittington & St. Michael melodies on the quarters and chimes the hours, on a 12-rod gong.

Pendulum length 116cm. Cable & Weight Drive.

THIS MOVEMENT SET IS IDEAL FOR A GRANDFATHER CLOCK. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger HSU 01 - 116cm. Highly polished version.
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 116cm Timber Pendulum with a 165mm Brass Bob.
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 60 x 245mm.
  • Shell Fillings: Strike 4kg, Time 5.0kg (6.5kg for heavy pendulums), Chime 5.0kg.
  • Gongs: Twelve-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HSU 116cm Pendulum Movement specifications. Plate size 158mm x 230mm x 2.8mm, 24 bronze bushes and 12 genuine Ruby bushes providing the pivots for the motion work, there is a Dead-beat Graham escapement, Automatic Tick (beat) adjustment Westminster, Maintaining power to drive the pendulum during the winding sequence, Automatic beat adjustment to ensure an even tick, Maltese cross cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, individual selection of the three melodies Westminster, Whittington & St Michael or Continuous playing. The Hourly chimes and the melodies are played on a 12-rod gong.

For export orders we offer all our sets with or without the shell fillings - this reduces the shipping weight and there is a also a reduction of the kit price! If you can obtain fillings locally, you will require one filling of 4kg & two of five kg - all with a maximum diameter of 56mm and a maximum length of 245mm. On the options & prices page you will find a large range of alternative metal dials & Pendulums.

This movement kit requires a minimum measurement of 215mm from the front of the hand-shaft to the inside face of the rear panel and the weights need to be able to drop a minimum distance of 1615mm, measured between the centre of the dial and the inside bottom of the cabinet. The 270mm bob pendulum needs an cabinet minimum internal swing width of 395mm. A Temperature Compensating Pendulum with a 200mm bob needs a cabinet minimum internal swing width of 350mm. The distance from the rear panel to the front face of the weight is approximately 160mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,403.39 (EUR 1,601.83)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 53 Movement Dials and Pendulums images page.

Click here to view the Set 53 Options and Prices page.

| Oakside Clock Gallery | Kieninger Floor Clocks | Kieninger Month Running Clocks | Kieninger Table Clocks | Kieninger Wall Clocks | Hermle Month Regulators | Hermle Table Clocks | Hermle Wall Clocks | Altobel Antonio Italian Clocks | Clock Makers Plans | Kieninger Movement, Dial & Pendulum Sets | Kieninger Clock Movements | Dials, Pendulums, Accessories & Movement Repair Parts | Kieninger Manuals & Links | Clocks Built by Others | Home | About Us | Visit Showroom | Contact Oakside | Terms & Conditions | FAQ - I need help now!

Oakside's hours of business: Monday - Saturday, 10.00 to 18.00, Sunday 11.00 to 14.00.
(Our local time is now: ??:??)
Telephone 0118 9701 nine 85 (int. +44 118 9701 nine 85)
Copyright © Frank Redmile - Oakside Classic Clocks
Please read our Terms and Conditions