Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
PLEASE ALLOW ABOUT TWO WEEKS BETWEEN PLACING AN ORDER AND RECEIVING A SHIPPING NOTICE FROM OAKSIDE - THIS IS BECAUSE EACH SET HAS TO BE ASSEMBLED TO ORDER.
Clockmakers Set 01 featuring the Kieninger AEL 04 movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
Plays the Westminster melody on a five-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger AEL 04 - with chrome brackets that can be used on the front or rear plates..
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Gongs: AEL 5-rod gong, 120mm base mounting.
Mounting: Adaptable for Front or Rear movement fixing
Movement dimensions: AEL
Please note that all metal dials are supplied fitted to a back plate with four pillars - these connect directly to the front plate of the movement ensuring accurate positioning.
The AEL movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The AEL movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set is suitable for a mantle or small wall clocks - it requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
For your convenience we can supply the Dial, Hands and Movement assembled as a unit - the AEL 04 has two chrome plated brackets that can be front or rear mounted on the movement and these are used for attaching the movement to your clock cabinet.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£421.78 (EUR 510.35)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 02 featuring the Kieninger LEG movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
1/2 hour strike on a movement mounted brass Bell.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger LEG 01 with a rear mounted polished brass bell.
Dial: Kieninger 150mm Dial including Hands
Gongs: Single rear mounted brass bell.
Mounting: Movement fixing pillars and screws
Movement dimensions: LEG
Please note that all metal dials are supplied fitted to a back plate with four pillars - these connect directly to the front plate of the movement ensuring accurate positioning.
The LEG 01 movement specifications. Plate size 100mm x 85mm x 1.7mm with 4 bronze bushes. 5-jewel Swiss Escapement, Chime silencing, front Winding through the Dial. The movement chimes the hours with a single chime on the half-hour on a single 50mm brass bell.
This movement set is suitable for mantle or small wall clocks. It requires a minimum measurement of 108mm from the front of the hand-shaft to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£314.95 (EUR 381.09)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 03FP featuring the Kieninger J 0212 Front winding Polished movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
Plays the Westminster, Whittington & St. Michael melodies on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger J 0221 Front winding, Highly Polished Version on legs.
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Gongs: Eight rod polished base mounted gong.
Mounting: Brass legs fitted to the movement and gong
Movement dimensions: JE front winding
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 0221 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial but it is available to order with Rear winding.
This movement is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£809.00 (EUR 978.89)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 03FS featuring the Kieninger J 0244 Front winding Satin movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
Plays the Westminster, Whittington & St. Michael melodies on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger J 0203 front winding movement on legs
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Gongs:
Mounting: Polished brass base mounting set of legs for J movements (use with gong 011/J)
Movement dimensions: JR rear winding
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 0203 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This movement is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£644.00 (EUR 779.24)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 03RP featuring the Kieninger JE 0208 Rear winding Polished movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
Plays the Westminster, Whittington & St. Michael melodies on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement on order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger J 0208 rear winding on polished legs.
Dial: Kieninger 122mm diameter White dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Gongs: Polished Brass Base mounting Gongs - High rods Use with Mounting 013/J. Kieninger J movement.
Mounting: Polished brass base mounting set of legs for J movements (use with gong 010/J)
Movement dimensions: JR rear winding
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 0212 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This Special Base mounting version of the J movement is highly polished and it includes a polished 8-rod brass gong assembly and matching polished brass legs. It is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£910.10 (EUR 1,101.22)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 03RS featuring the Kieninger JE 0203 Rear winding Satin movement
Swiss Balance Wheel Escapement. Spring Drive. 7 day running.
Plays the Westminster, Whittington & St. Michael melodies on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger J 0203 rear winding on polished legs.
Dial: Kieninger 122mm diameter White dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Gongs:
Mounting: Polished brass base mounting set of legs for J movements (use with gong 011/J)
Movement dimensions: JR rear winding
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 0244 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds at the rear.
This movement is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£879.00 (EUR 1,063.59)
Please note that we ship to Canada, USA, Australia & New Zealand.
Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Gongs: Nest of nine Polished brass bells for KSU55, RWU & REC
Mounting: Foot fixing screws included.
Movement dimensions: REC
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The REC Mantle clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent.
This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,385.72 (EUR 1,676.72)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 04M featuring the Kieninger REC 03 nine bells Mozart movement
Swiss Chronometer Escapement. Spring Drive. 7 day running.
With exclusive Mozart chimes melodies on nine nested brass bells.
THIS MOVEMENT SET IS IDEAL FOR LARGE TABLE OR MANTEL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger REC Mozart Triple melody and highly polished version.
Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Gongs: Nest of nine Polished brass bells for KSU55, RWU & REC
Mounting: Movement clamp bars
Movement dimensions: REC
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The REC Mantle clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent.
This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,584.18 (EUR 1,916.86)
Please note that we ship to Canada, USA, Australia & New Zealand.
Gongs: Nest of nine Polished brass bells for KSU55, RWU & REC
Mounting: Fixing screws and washers
Movement dimensions: RWU
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RWU Mantle clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent.
Fitted with a miniature polished brass pendulum with a 50mm bob.
This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,499.00 (EUR 1,813.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Gongs: Nest of nine Polished brass bells for KSU55, RWU & REC
Mounting: Fixing screws and washers
Plans: Kieninger movement installation drawing is included with all Sets.
Movement dimensions: RWU
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RWU Mantle clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent.
Fitted with a miniature polished brass pendulum with a 50mm bob.
This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£999.00 (EUR 1,208.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 06 featuring the Kieninger J 1210 29cm movement
Pendulum length 29cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 29cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Oakside special assembly order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: J 1210 29cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 29cm x 80mm Pendulum
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Back panel Easy mounting system included
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1210 clock movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This clock movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 186mm. Total swing of the 80mm diameter bob is 115mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger clock movements.
Price including UK delivery and VAT£614.55 (EUR 743.61)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 07 featuring the Kieninger APL 29cm movement
Pendulum length 29cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 29cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 29cm x 80mm Pendulum
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
APL 29cm movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 29cm movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum and 80mm bob the distance from the hand-shaft to the centre of the bob is 170mm and the total swing is 100mm.
The APL 29cm is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£399.00 (EUR 482.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 08 featuring the Kieninger J 1210 35cm movement
Pendulum length 35cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 35cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOC (Oakside special assembly order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: J 1210 35cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: 29 cm pendulum
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Back panel Easy mounting system included
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1210 clock movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This clock movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 257mm. Total swing of the 80mm diameter bob is 130mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger clock movements.
Price including UK delivery and VAT£575.19 (EUR 695.98)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 09 featuring the Kieninger APL 35cm movement
Pendulum length 35cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 01 - 35cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: 35cm PL with an 80mm Polished brass bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 03 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL 05 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£393.00 (EUR 475.53)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 10 featuring the Kieninger J 1210 43cm movement
Pendulum length 43cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 43cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: J 1210 43cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 43cm Grid Pendulum with an 80mm Brass Bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Easy Movement & Gong Mount Frame for J movements (for fitting to the front of the movement).
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1210 clock movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This clock movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 340mm. Total swing of the 80mm diameter bob is 135mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger clock movements.
Price including UK delivery and VAT£614.55 (EUR 743.61)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 11 featuring the Kieninger APL 43cm movement
Pendulum length 43cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 05 - 43cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: 43cm PL with an 80mm Polished brass bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Four pillars connect to the rear panel of the clock - included.
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 05 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL 05 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£393.18 (EUR 475.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 12 featuring the Kieninger J 1210 48cm movement
Pendulum length 48cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 48cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Oakside special assembly order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: J-1210 48cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 48cm Grid Pendulum with an 80mm Brass Bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Easy Movement & Gong Mount Frame for J movements (for fitting to the front of the movement).
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1210 clock movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This clock movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 390mm. Total swing of the 80mm diameter bob is 140mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger clock movements.
Price including UK delivery and VAT£614.55 (EUR 743.61)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 13 featuring the Kieninger APL 48cm movement
Pendulum length 48cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 48cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 48cm Grid Pendulum with an 80mm Brass Bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Rear mounting Pillars (4) APL
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 48cm movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL 48cm is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£445.00 (EUR 538.45)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 14 featuring the Kieninger J 1210 54cm movement
Pendulum length 54cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 54cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 54cm Timber Pendulum with a 115mm Brass Bob. 19mm wide stick
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Back panel Easy mounting system included
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1236 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 440mm. Total swing of the 80mm diameter bob is 150mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£614.55 (EUR 743.61)
Please note that we ship to Canada, USA, Australia & New Zealand.
Mounting: Easy Movement & Gong Mount Frame for J movements (for fitting to the front of the movement).
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
This movement and dial asembly has been previously owned and has now been servised and tested by Frank.
The JM09 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation.
THe chime control lever has three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent.
This movement winds through the dial.
This movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel.
Distance from the centre of the dial to the centre of the pendulum bob is approximately 440mm.
Total swing of the 80mm diameter bob is 150mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£475.00 (EUR 574.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 15 featuring the Kieninger APL 54cm movement
Pendulum length 54cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: APL 07 - 54cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 54cm Timber Pendulum with a 115mm Brass Bob. 19mm wide stick
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: APL 5-rod gong, 180mm rear panel mounting.
Mounting: Four brass rear mounting pillars included
Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL 07 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (107) and 80mm bob, the distance from the hand-shaft to the centre of the bob is 395mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 115mm bob, the distance from the hand-shaft to the centre of the bob is 450mm. The distance from the hand shaft down to the lowest tip of the pendulum is 525mm.
The APL 07 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£414.12 (EUR 501.09)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 16 featuring the Kieninger LSR, 65cm movement
Pendulum length 65cm. Cable & Weight Drive.
Chimes the hours on a coiled gong.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger LSR 02 - 65cm PL.
Dial: Kieninger 150mm Dial including Hands
Pendulum: Stick pendulum with a 115mm brass bob
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Pulleys: Two brass pulleys.
Weight Shells: Two - 50mm x 140mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 120mm with small hooks
Gongs: 50 mm polished brass bell mounted on the rear of the movement.
Mounting: Four brass rear mounting pillars included
Movement dimensions: LSR
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The LSR 02 movement specifications. Plate size 100mm x 85mm x 1.7mm with 4 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Chime silencing and front Winding through the Dial. The movement chimes the hours and strikes a single chime on the half hour on coil gong.
This movement set requires a minimum measurement of 108mm from the front of the hand-shaft to the inside of the rear panel, the pendulum with a 140mm diameter bob swings approximately 190mm. To achieve eight-day running the weights drop 730mm measured from the hand-shaft to the bottom of the case. The distance from the hand-shaft to the bottom of the cabinet needs to be a minimum of 420mm to achieve eight-day running. The distance from the rear panel to the front face of the weights is approximately 135mm.
The Dial, Hands and Movement are supplied assembled and ready for mounting on your support board - you need to drill three holes in the rear board using the template provided and the chimes can be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£389.95 (EUR 471.84)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 17 featuring the Kieninger PS 055, 65cm Vienna movement
Pendulum length 65cm. Cable & Weight Drive.
Chimes the hours and 1/2 hour on a coiled gong.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 055 - 65cm. Automatic Night Silencing.
Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Timber shaft with a 140mm polished brass bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Pulleys: Two brass pulleys.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 055 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£745.80 (EUR 902.42)
Please note that we ship to Canada, USA, Australia & New Zealand.
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 063 - 65cm. Automatic Night Silencing. Maintaining power
Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Timber shaft with a 140mm polished brass bob.
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£768.14 (EUR 929.45)
Please note that we ship to Canada, USA, Australia & New Zealand.
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 063 - 65cm. Automatic Night Silencing. Maintaining power
Dial: Oakside 200mm diameter white Regulator dial (including hands) with black Roman numerals, two subsidiary dials show the hours and seconds and finished with a brass rim.
Pendulum: Timber shaft with a 140mm polished brass bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Pulleys: Small brass cable pulley (35mm) for PS & RS movements.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm with small hooks
Gongs: 133mm Coil gong Kieninger PS
Mounting: Brass Mounting Bracket with special screws. PS movement,
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. Fitted with Maintaining Power, a dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 063 movement chimes the hours and strikes on the half-hour on a coiled gong.
The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.99 (EUR 967.99)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 22 featuring the Kieninger RWS 13, 65cm Vienna movement
Pendulum length 65cm. Spring & Cable Weight Drive.
Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
THIS MOVEMENT SET IS IDEAL FOR MEDIUM WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger RWS 13 - 65cm.
Dial: Oakside 180mm diameter white dial (including hands) with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Timber shaft with a 140mm polished brass bob.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Pulleys: One twin weight yoke pulley.
Weight Shells: Two - 50mm x 120mm with large hooks
Shell Fillings: Two lead @ 2.0kg. 48mm x 120mm
Gongs: 8-rod gong - 430mm for RWS.
Mounting: Cable suspension plate included in set.
Movement dimensions: RWS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 13, 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm. The distance from the rear panel to the front face of the weight is approximately 120mm.
The Dial, Hands and Movement can be supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£839.61 (EUR 1,015.93)
Please note that we ship to Canada, USA, Australia & New Zealand.
Clockmakers Set 23 featuring the Kieninger J 1210 65cm movement
Pendulum length 65cm. Spring drives.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS.Pendulum length 65cm. Spring drives.
Plays the Westminster, Whittington ans St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Oakside special assembly order)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: J 1210 65cm
Dial: Kieninger 155mm diameter White Dial with black Roman numerals and an imitation brass rim.
Pendulum: Kieninger 65cm Timber Pendulum with a 140mm Brass Bob.19mm wide black stick.
Pendulum parts: Pendulum leader 115mm, PL between 35 & 72cm.
Gongs: 8-rod gong - 140mm - rear mounting Kieninger J movement
Mounting: Easy Movement & Gong Mount Frame for J movements (for fitting to the front of the movement).
Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The J 1236 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. Distance from the centre of the dial to the centre of the pendulum bob is approximately 548mm. Total swing of the 115mm diameter bob is 195mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£614.55 (EUR 743.61)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three - 50mm x 240mm with small hooks
Shell Fillings: Three @ 3.0kg.
Gongs:
Mounting: Movement fixing screws and plates
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Over swinging the pendulum will automaticaly correct the tick (beat), Automatic night silencing.
The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.
The movement requires a minimum measurement of 175mm from the inside face of the dial glass to the inside of the rear panel.
The weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.
When using the grid pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 720mm. The swing is about 200mm.
The distance from the rear panel to the front face of the weight is approximately 140mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.00 (EUR 966.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Movement fixing screws and plates
Movement dimensions: PK
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The PK movement specifications. Plate size 114mm x 99mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Automatic night silencing. The movement chimes the hours on an 8-rod gong.
The movement requires a minimum measurement of 107mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1355 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 787mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 80mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£526.00 (EUR 636.46)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cable suspension plate.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Over swinging the pendulum will automaticaly correct the tick (beat).
A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS movement chimes the hours and strikes on the half-hour on a round gong.
The PS 80cm movement requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel;
To achieve eight-day running the weights need to be able to drop 760 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.
When using the grid pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 720mm. The swing is about 200mm.
The distance from the rear panel to the front face of the weight is approximately 100mm.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£776.91 (EUR 940.06)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Two - 50mm x 120mm with large hooks
Shell Fillings: Two lead @ 2.0kg.48mm x 120mm
Gongs: 8-rod gong assembly - included.
Mounting: Cable suspension plate included in set.
Movement dimensions: RWS
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The RWS 25 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Over swinging the pendulum will automaticaly correct the tick (beat). Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 25 - 80cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel.
To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.
When using the grid pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 720mm. The swing is about 200mm.
The distance from the rear panel to the front face of the weight is approximately 120mm.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements
Price including UK delivery and VAT£825.76 (EUR 999.17)
Please note that we ship to Canada, USA, Australia & New Zealand.
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong - 680mm. SK MS SK KS
Mounting: Movement clamp bars
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
The SK 93cm Pendulum Movement specifications. Hand shaft length 56mm (from front plate to hand shaft nut tip). Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum with a 115mm bob swings approximately 195mm
The Timber pendulum with a 140mm bob swings approximately 210mm
The Brass Grid pendulum with a 140mm bob swings 200mm
The Lyre pendulum with a 165mm bob swings 245mm.
The Lyre pendulum with a 220mm bob swings 270mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three - 50mm x 240mm with small hooks
Shell Fillings: Three @ 3.0kg.
Gongs: 8-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
The RK 93cm movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
The Timber pendulum with a 115mm bob swings approximately 195mm
The Timber pendulum with a 140mm bob swings approximately 210mm
The Brass Grid pendulum with a 140mm bob swings 200mm
The Lyre pendulum with a 165mm bob swings 245mm - the distance from handshaft nut to bob centre is 830mm.
The Lyre pendulum with a 220mm bob swings 270mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.00 (EUR 966.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Gongs: Nest of nine Polished brass bells for KSU55, RWU & REC
Mounting: Fixing screws and washers
Movement dimensions: RWU
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RWU wall clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells.
There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent.
This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£999.00 (EUR 1,208.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 38 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial provides the selection of any of the three melodies and Silent - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,071.92 (EUR 1,297.02)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three 40mm x 245mm polished brass shells
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong - 680mm. SK MS SK KS
Mounting: Movement clamp bars
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The SK 100cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum with a 140mm bob swings 210mm
The Lyre pendulum with a 165mm bob swings 245mm
The Lyre pendulum with a 220mm bob swings 270mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 36 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the three melodies. The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the front of the hands shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.
As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.
The Lyre Pendulum 094, 100cm with a 225mm bob measures approximately 920mm from the hand-shaft to the centre of the bob.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,104.31 (EUR 1,336.22)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: 12-rod gong - 680mm for KSU
Mounting: Movement clamp bars
Movement dimensions: KSU50 & 52
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 52, 100cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,046.38 (EUR 1,266.12)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: One 50mm x 240 mm brass shell (select appropriate filling
Shell Fillings: Lead 4.0kg
Gongs: 8-rod gong assembly - included.
Mounting: Brass Brushed finish movement support bracket. Cable suspension plate included in set.
Movement dimensions: RWS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
This set is based on the Kieninger RWS 25, 116cm Polished movement
We can supply this set with one longer weight shell on a single pulley or a pair of weights on a single yoke pulley.
The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 13, 116cm movement requires a clock cabinet with a minimum depth of 135mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 125mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£890.75 (EUR 1,077.81)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 180mm.
Shell Fillings: Strike 3.4kg, Time 3.4kg (4.5kg for heavy pendulums), Chime 3.4kg.
Gongs: 8-rod gong assembly - included.
Mounting: Cable suspension plate included in set.
Movement dimensions: RS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RS005 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RS005 movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.
The RS005 116cm movement requires a distance of 1070mm from the centre of the dial to the centre of the pendulum bob, a minimum case width of 285mm to accommodate a 200mm bob and a depth of 140mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,084.76 (EUR 1,312.56)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 180mm.
Shell Fillings: Strike 3.4kg, Time 3.4kg (4.5kg for heavy pendulums), Chime 3.4kg.
Gongs: Nest of five Polished brass bells for RSB.
Mounting: Cable suspension plate included in set.
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RSB movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment.
Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent.
The RSB movement chimes the hours and plays the Westminster melody on the quarters, on a nest of five polished bells.
The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.
The RSB 116cm movement requires a distance of 1070mm from the centre of the dial to the centre of the pendulum bob, a minimum case width of 285mm to accommodate a 200mm bob and a depth of 140mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£999.00 (EUR 1,208.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three 40mm x 245mm polished brass shells.
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong assembly - Included.
Mounting: Movement fixing screws and plates
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The SK 116cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum (086) with a 165mm bob swings 210mm
The Lyre pendulum (095) with a 165mm bob swings 245mm
The Lyre pendulum (096) with a 220mm bob swings 270mm. The distance from the handshaft nut to the centre of the bob is 1040mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 245mm.
Shell Fillings: Strike 3.0kg, Time 3.0kg, Chime 3.0kg.
Gongs: 8-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RK 047 movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes.
The movement plays the Westminster melody on the quarters on four rods of the gong.
The movement strikes the hours on four rods of the gong.
Patented Kienirramic solid anchor Dead Beat Graham escapement
Automatic tick (beat adjustment).
Two levers allow selection of Continuose, Automatic Night Silencing or Silent for the Strike and Chime.
Handshaft protrusion (movement front plate to tip, 35.8mm.
The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
For 8-day running the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.00 (EUR 966.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KSU50 & 52
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 50, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,046.38 (EUR 1,266.12)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 3.0kg (4.0kg for heavy pendulums), Chime 4.0kg.
Gongs: 16-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KSU63
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The KSU 63, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for the Chimes and Melodies. The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing (between 10pm to 7-15am) or Continuous. The control that protrudes through the slot on the right side of the dial controls the three melodies - Westminster, Ave Maria (Schubert) and Freude schöner Götterfunke (ode to joy) and allows selection of Silent, any of the three Chimes or Continuous playing - The Hourly chimes and the Quartely melodies play on a 16-rod gong.
Please not the this movement only plays the chimes on the hour followed by the hour striking; at quarter past the hour is strikes once; at the half-hour is strikes twice and at 45 minutes past the hour it strikes three times.
This movement set requires a minimum measurement of 250mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. A timber pendulum with a 165mm bob will swing 270mm. A large lyre pendulum with a 270mm bob will swing 355mm. The distance from the rear panel to the front face of the weight is approximately 220mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£999.50 (EUR 1,209.40)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: Nest of nine bells included.
Mounting: Movement fixing screws and plates
Movement dimensions: KSU55
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 55 movement strikes the hours and chimes three melodies - Westminster, Whittington & St. Michael on the quarters on a nest of nine brass bells.
The KSU 55, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or Selection off any off the three melodies
This movement set requires a minimum measurement of 195mm from the front of the hand shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.
As an approximate guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,249.95 (EUR 1,512.44)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Two lead fillings 58 x 240mm
Gongs:
Mounting: Cable hanging plate for HS movements
Mounting: Movement clamp bars
Movement dimensions: HS Com
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE comtoise, 116cm Pendulum & cable Movement with bim-bam striking on an 8-rod gong..
We can also supply this movement fitted with a single rear-mounted brass bell - please enquire.
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£645.00 (EUR 780.45)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Shell 60 x 245mm with large hook (Antique Brushed Brass)
Shell Fillings: Strike; 3.5kg. Time; 4.0kg
Gongs: 100mm diameter cast brass bell.
Mounting: Movement clamp bars
Movement dimensions: HE bell
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE BELL, 116cm Pendulum Chain Movement specifications; Half hour striking on a single rear mounted 100mm cast bell.
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£619.00 (EUR 748.99)
Please note that we ship to Canada, USA, Australia & New Zealand.
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE 011, 116cm Pendulum Chain Movement specifications; Half hour Bim Bam striking on an eight-rod gong
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£665.00 (EUR 804.65)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 4kg, Time 5.0kg (6.5kg for heavy pendulums), Chime 5.0kg.
Gongs: Twelve-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: HSU
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HSU 116cm Pendulum Movement specifications. Plate size 158mm x 230mm x 2.8mm, 24 bronze bushes and 12 genuine Ruby bushes providing the pivots for the motion work, there is a Dead-beat Graham escapement, Automatic Tick (beat) adjustment Westminster, Maintaining power to drive the pendulum during the winding sequence, Automatic beat adjustment to ensure an even tick, Maltese cross cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, individual selection of the three melodies Westminster, Whittington & St Michael or Continuous playing. The Hourly chimes and the melodies are played on a 12-rod gong.
For export orders we offer all our sets with or without the shell fillings - this reduces the shipping weight and there is a also a reduction of the kit price! If you can obtain fillings locally, you will require one filling of 4kg & two of five kg - all with a maximum diameter of 56mm and a maximum length of 245mm. On the options & prices page you will find a large range of alternative metal dials & Pendulums.
This movement kit requires a minimum measurement of 215mm from the front of the hand-shaft to the inside face of the rear panel and the weights need to be able to drop a minimum distance of 1615mm, measured between the centre of the dial and the inside bottom of the cabinet. The 270mm bob pendulum needs an cabinet minimum internal swing width of 395mm. A Temperature Compensating Pendulum with a 200mm bob needs a cabinet minimum internal swing width of 350mm. The distance from the rear panel to the front face of the weight is approximately 160mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,403.39 (EUR 1,698.10)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 4kg, Time 5.0kg, Chime 6.5kg.
Gongs: Nine polished brass gong tubes for HTU
Mounting: Movement fixing screws and plates
Movement dimensions: HTU
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HTU 116cm Pendulum Movement specifications. Plate size 158mm x 230mm x 2.8mm, 24 bronze bushes and 12 genuine Ruby bushes providing the pivots for the motion work, there is a Dead-beat Graham escapement, Automatic Tick (beat) adjustment Westminster, Maintaining power to drive the pendulum during the winding sequence, Automatic beat adjustment to ensure an even tick, Maltese cross cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, individual selection of the three melodies Westminster, Whittington & St Michael or Continuous playing. The Hourly chimes and the melodies are played on nine full length brass tubular bells.
For export orders we offer all our sets with or without the shell fillings - this reduces the shipping weight and there is a also a reduction of the kit price! If you can obtain fillings locally, you will require one filling of 4kg & two of five kg - all with a maximum diameter of 56mm and a maximum length of 245mm. On the options & prices page you will find a large range of alternative metal dials & Pendulums.
This movement kit requires a minimum measurement of 240mm from the front of the hand-shaft to the inside face of the rear panel and the weights need to be able to drop a minimum distance of 1615mm, measured between the centre of the dial and the inside bottom of the cabinet. The internal trunk width needs to be at least 345mm to accomodate the tubular bells. The 270mm bob pendulum needs an cabinet minimum internal swing width of 395mm. A Temperature Compensating Pendulum with a 200mm bob needs a cabinet minimum internal swing width of 350mm. The distance from the rear panel to the front face of the weight is approximately 190mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£3,280.00 (EUR 3,968.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
