Oakside Classic Clocks

Contents



British Flag English

German Flag Deutsch


Valid XHTML 1.0 Strict Valid CSS!


SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

buywithconfidence

Kieninger Clock Movement Sets for Clock Makers who insist on the Best!

Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.

Kieninger Online Shop

The Clock Makers Sets illustrated on this page are assembled around a superb Kieninger mechanical clock movement. All clock makers sets include a dial, a gong, a winding key and the movement fixings and where appropriate, the set will also include a pendulum, the polished brass weight 'shells & fillings' and the cable pulleys. On the Sets 'Options & Prices' page Y

you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions.

On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!

Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!

CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.

If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.

There is also lots of interesting information on the Kieninger Manuals & Interesting Links page.

Plan 002 -- Grandmother Clock

plan_002.jpg
Enlarge

Grandmother Clock. Height 1970mm, Width 450mm, Depth 300mm. (Kieninger movement installation drawing included).

All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.

Set 19A featuring the Kieninger RK 014 movement

RK014

Pendulum length 80cm. Chain & Weight Drive. (Oakside special assembly order)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RK 80cm
  • Dial: 200mm x 265mm tempus Fugit dial (including hands) with black Roman numerals and cast corner spandrels. This dial does not have pillars for movement mounting.
  • Pendulum: Kieninger 80cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three - 50mm x 240mm with small hooks
  • Shell Fillings: Three @ 3.0kg.
  • Gongs: 8-rod gong - 680mm for RK 046.
  • Mounting: Movement fixing screws and plates

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, manual Night Silencing. The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £0.00 (EUR 0.00)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 19A Movement Dials and Pendulums images page.

Click here to view the Set 19A Options and Prices page.

Set 21 featuring the Kieninger KSU 38 movement

KSU38

Pendulum length 93cm. Cable & Weight drive. Maintaining Power.

Plays the Westminster, Whittington & St. Michael melodies on a 12- rod gong.

THIS MOVEMENT SET IS IDEAL FOR LARGE WALL CLOCKS OR SMALL FLOOR CLOCKS. (Movement on order)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger KSU 38 - 93cm
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 93cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Three - 60mm x 240mm with large hooks
  • Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
  • Gongs: 12-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 38 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial provides the selection of any of the three melodies and Silent - The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,099.00 (EUR 1,312.32)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 21 Movement Dials and Pendulums images page.

Click here to view the Set 21 Options and Prices page.

Set 22 featuring the Kieninger RK 046 movement

RK046

Pendulum length 93cm. Chain & Weight Drive.

Plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

THIS MOVEMENT SET IS IDEAL FOR LARGE WALL CLOCKS OR SMALL FLOOR CLOCKS. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger RK 046 - 93cm
  • Dial: 200mm x 265mm tempus Fugit dial (including hands) with black Roman numerals and cast corner spandrels. This dial does not have pillars for movement mounting.
  • Pendulum: Kieninger 93cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three - 50mm x 240mm with small hooks
  • Shell Fillings: Three @ 3.0kg.
  • Gongs: 8-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, manual Night Silencing. The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £732.66 (EUR 874.87)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 22 Movement Dials and Pendulums images page.

Click here to view the Set 22 Options and Prices page.

Set 23 featuring the Kieninger SK 025 movement

SK 025

Pendulum length 93cm. Chain & Weight Drive. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger SK 025
  • Dial: 200mm x 265mm tempus Fugit dial (including hands) with black Roman numerals and cast corner spandrels. This dial does not have pillars for movement mounting.
  • Pendulum: Kieninger 93cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three 40mm x 245mm polished shells
  • Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
  • Gongs: 8-rod gong - 680mm. SK 012.
  • Mounting: Movement clamp bars
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The SK 93cm Pendulum Movement specifications. Hand shaft length 56mm (from front plate to hand shaft nut tip). Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.

This movement set requires a minimum measurement of 189mm from the inside face of the dial glass to the inside of the rear panel.

The Timber pendulum with a 165mm bob swings 210mm

The Brass Grid pendulum (090) with a 140mm bob swings 200mm

The Lyre pendulum (091) with a 165mm bob swings 245mm - the distance from handshaft nut to bob centre is 830mm.

The Lyre pendulum (092) with a 220mm bob swings 270mm.

The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £629.00 (EUR 751.09)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 23 Movement Dials and Pendulums images page.

Click here to view the Set 23 Options and Prices page.

Set 24 featuring the Kieninger SK 015 movement

SK 015

Pendulum length 100cm. Chain & Weight Drive. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger SK 015
  • Dial: 200mm x 265mm tempus Fugit dial (including hands) with black Roman numerals and cast corner spandrels. This dial does not have pillars for movement mounting.
  • Pendulum: Kieninger 100cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Weight Shells: Three 40mm x 245mm polished brass shells
  • Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
  • Gongs: 8-rod gong - 680mm. SK 012.
  • Mounting: Movement clamp bars
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The SK 100cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.

This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.

The Timber pendulum (085) with a 165mm bob swings 210mm

The Lyre pendulum (093) with a 165mm bob swings 245mm - The distance from the handshaft nut to the centre of the bob is 955mm.

The Lyre pendulum (094) with a 220mm bob swings 270mm.

The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

Firefox recommended, IE maybe

Price including UK & Ireland delivery £649.00 (EUR 774.97)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 24 Movement Dials and Pendulums images page.

Click here to view the Set 24 Options and Prices page.

Set 25 featuring the Kieninger KSU 36 movement

KSU36

Pendulum length 100cm. Cable & Weight drive.

Plays the Westminster, Whittington & St. Michael melodies on a 12- rod gong.

THIS MOVEMENT SET IS IDEAL FOR GRANDMOTHER CLOCKS AND SMALL GRANDFATHER CLOCKS. (Movement in stock)

The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!

  • Movement: Kieninger KSU 36 - 100cm
  • Dial: Kieninger 280 x 395mm Moon dial (including hands) with Brass Arabic numerals on a silver chapter ring. Etched spandrels.
  • Pendulum: Kieninger 100cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
  • Pendulum parts: Pendulum leader 164mm, PL between 72 & 116cm. B-0444-000
  • Pulleys: Three brass pulleys included.
  • Weight Shells: Polished brass weight shell complete, 60 x 245mm.
  • Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
  • Gongs: 12-rod gong assembly - included.
  • Mounting: Movement fixing screws and plates
  • Plans: Kieninger movement installation drawing is included with all Sets.

Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 36 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the three melodies. The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the front of the hands shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.

As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

The Lyre Pendulum 094, 100cm with a 225mm bob measures approximately 920mm from the hand-shaft to the centre of the bob.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Firefox recommended, IE maybe

Price including UK & Ireland delivery £1,104.31 (EUR 1,318.66)

Please note that we ship to Canada, USA, Australia & New Zealand.

Click here to view the Set 25 Movement Dials and Pendulums images page.

Click here to view the Set 25 Options and Prices page.

Oakside Clock Gallery | Kieninger Floor Clocks | Kieninger Table Clocks | Kieninger Wall Clocks
Hermle Floor Clocks | Hermle Table Clocks | Hermle Wall Clocks | Altobel Antonio Italian Clocks
Clock Makers Plans | Kieninger Movement, Dial & Pendulum Sets | Kieninger Clock Movements
Dials, Pendulums, Accessories & Movement Repair Parts | Kieninger Manuals & Links
Clocks Built by Others
Home | About Us | Visit Showroom | Contact Oakside | Terms & Conditions | FAQ - I need help now!

Oakside's hours of business: Monday - Saturday, 10.00 to 18.00, Sunday 11.00 to 14.00.
(Our local time is now: ??:??)
Telephone 0118 9701 nine 85 (int. +44 118 9701 nine 85)
Copyright © Frank Redmile - Oakside Classic Clocks
Please read our Terms and Conditions