Oakside Classic Clocks


British Flag English

German Flag Deutsch

Valid XHTML 1.0 Strict Valid CSS!

SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment

Hermle 70961-740761 Kingsland Precision Regulator

Photo of the Hermle 70961-740761

Month running Wall Regulator

Mechanical Month Running Precision movement.

Oakside is pleased to offer this superb modern Vienna Regulator which is fitted with a month running precision true regulator movement - Frank is so impressed with this clock that one now has pride of place in his sitting room.

The hand polished satin black finish cabinet with bright metal inlays is in classic modern design complete with glazing to the door and sides.

Fitted with a white dial decorated with black Roman numerals (I-XII) and baton indices and a subsidiary seconds dial.

Mechanical Precision cable-driven movement with 31 days running between windings

The precision movement has 6 ball bearings in the gear system, 2 ruby bushings are used for the third wheel, escape wheel and anchor. The Graham dead beat escapement has 2 ruby pallets.

The maintaining power reserve is engaged during winding keeps constant power to the movement for highest accuracy.

The true second indication will be managed by a 60 step wheel.

For highest accuracy it is fitted a carbon pendulum shaft with the famous “Huygenscher läufer” named after its inventor Huygens and used in precision pendulum clocks, a small platform is fitted to the pendulum rod; by adding or removing very small additional weights (masses) to or from this platform, causes a change in the centre of gravity of the pendulum and as a consequence, changes the oscillation period of the pendulum. In a combination with a double weight cylinder pendulum bob. Beat / tick adjustment is performed with an adjustment controller. As correcting time-keeping by adjusting the pendulum length can be a long process, Frank will fully adjust the pendulum on the Kingsland to provide an accuracy of within several seconds a day, prior to delivery, using the Oakside Electronic PC based timing instrument. After instalation you can then make ultra fine adjustments using the micro weights provided.

Unlike making adjustments to the pendulum bob which necessarily means stopping the clock, the small weights are varied using tweezers without causing the clock is stopped.

The micro weights made of nickel silver or aluminium are often marked, according to the approximate change in pendulum period.

The pendulum shaft has a small cradle that accommodates micro weights - by adding or removing different sizes of micron weight using the supplied tweezers, the centre of gravity of the pendulum is altered and this provides extremely fine corrections to the pendulum swing and time-keeping.

We are frequently asked about the time-keeping accuaracy acheivable with the Kingsland - by carefull adjustment of the pendulum, our computer based monitoring instrument is demonstrating that our showroom clock is now averaging an accuracy rate of -0.03 seconds/24 hours. We will provide a printout of this result if requested.

This is a true regulator and it is supplied with complete with Oakside´s full instructions for both installing and diagrams for time-keeping adjustment and settings. Frank will also be happy to assist over the phone during this process.

Height: 52¼ inches (133 cm), Width: 12 inches (30.5 cm), Depth: 7½ inches (19 cm)

Delivery - Hermle are closed until the New Year - Please enquire.

31-day+Precision+movement31-day Precision movement
Five+year+mechanical+movement+warranty.Five year mechanical movement warranty.

Click on the model number below to view a very large image:

The Hermle 70961-740761


31-day Mechanical high precision regulator movement

Price including delivery and VAT £4,499.00 (EUR 5,624.00)

.... Frank will always be pleased to provide technical advice when you are installing and commissioning your new clock ..

.... Two year mechanical movement warrantee

Click here to view the Hermle 70961-740761 Kingsland Options and Prices page.

Click here to view the Hermle Clock Gallery page.

| Oakside Clock Gallery | Kieninger Month Running  | Kieninger Table Clocks | Kieninger Movement Service & Repair | Hermle Month Regulators | Hermle Floor Clocks | Hermle Table Clocks | Hermle Wall Clocks | Altobel Antonio Italian Clocks | Clock Makers Plans | Kieninger Movement, Dial & Pendulum Sets | Kieninger Clock Movements | Dials, Pendulums, Accessories & Movement Repair Parts | Kieninger Manuals & Links | Clocks Built by Others | Home | About Us | Visit Showroom | Contact Oakside | Terms & Conditions | FAQ - I need help now!

Oakside's hours of business: Monday - Friday, 10:00 to 17:00. Saturday 11:00 to 15:00. Sunday Closed, except for clock viewing.
(Our local time is now: ??:??)
Telephone 0118 9701 521(int. +44 118 9701 521)
Copyright © Frank Redmile - Oakside Classic Clocks
Please read our Terms and Conditions