Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
PLEASE ALLOW ABOUT TWO WEEKS BETWEEN PLACING AN ORDER AND RECEIVING A SHIPPING NOTICE FROM OAKSIDE - THIS IS BECAUSE EACH SET HAS TO BE ASSEMBLED TO ORDER.
The Orleans floor clock evokes the era of 19th century France when the absolutism of the monarchy gave to the rise of the Citizen King, Louis Philippe (1830-48), whose rule saw the nation prosper and the ascendancy of the middle class.
In furniture, the most striking elements of the Louis Philippe style are the very clean, simple lines and wide ogee. Feet and brackets terminate in scrolls, and hardware was used sparingly. All these element were incorporated in this timeless design.
The "Orleans" model shows a graceful play of straight and curved lines. The crown moulding, which echoes the base, gently swoops toward the centre, with the upper section of the door echoing it, while below, the inside bottom door shape reflects this curve.
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 37 featuring the Kieninger SK 93cm movement
Pendulum length 93cm. Chain & Weight Drive. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger SK 93
Dial: Kieninger 250 x 330mm Moon dial (including hands) with black Roman numerals on a silver chapter ring. Cast spandrels.
Pendulum: Kieninger 93cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong - 680mm. SK MS SK KS
Mounting: Movement clamp bars
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
The SK 93cm Pendulum Movement specifications. Hand shaft length 56mm (from front plate to hand shaft nut tip). Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum with a 115mm bob swings approximately 195mm
The Timber pendulum with a 140mm bob swings approximately 210mm
The Brass Grid pendulum with a 140mm bob swings 200mm
The Lyre pendulum with a 165mm bob swings 245mm.
The Lyre pendulum with a 220mm bob swings 270mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three - 50mm x 240mm with small hooks
Shell Fillings: Three @ 3.0kg.
Gongs: 8-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
The RK 93cm movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
The Timber pendulum with a 115mm bob swings approximately 195mm
The Timber pendulum with a 140mm bob swings approximately 210mm
The Brass Grid pendulum with a 140mm bob swings 200mm
The Lyre pendulum with a 165mm bob swings 245mm - the distance from handshaft nut to bob centre is 830mm.
The Lyre pendulum with a 220mm bob swings 270mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.00 (EUR 966.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 38 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial provides the selection of any of the three melodies and Silent - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,071.92 (EUR 1,297.02)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three 40mm x 245mm polished brass shells
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong - 680mm. SK MS SK KS
Mounting: Movement clamp bars
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The SK 100cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum with a 140mm bob swings 210mm
The Lyre pendulum with a 165mm bob swings 245mm
The Lyre pendulum with a 220mm bob swings 270mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Chime 3kg (Iron); Time 3kg (4kg for heavy pendulums) Iron; Chime 4kg (Iron).
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 36 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the three melodies. The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the front of the hands shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 185mm.
As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.
The Lyre Pendulum 094, 100cm with a 225mm bob measures approximately 920mm from the hand-shaft to the centre of the bob.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£1,104.31 (EUR 1,336.22)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: 12-rod gong - 680mm for KSU
Mounting: Movement clamp bars
Movement dimensions: KSU50 & 52
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 52, 100cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,046.38 (EUR 1,266.12)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: One 50mm x 240 mm brass shell (select appropriate filling
Shell Fillings: Lead 4.0kg
Gongs: 8-rod gong assembly - included.
Mounting: Brass Brushed finish movement support bracket. Cable suspension plate included in set.
Movement dimensions: RWS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
This set is based on the Kieninger RWS 25, 116cm Polished movement
We can supply this set with one longer weight shell on a single pulley or a pair of weights on a single yoke pulley.
The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 13, 116cm movement requires a clock cabinet with a minimum depth of 135mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 125mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£890.75 (EUR 1,077.81)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 180mm.
Shell Fillings: Strike 3.4kg, Time 3.4kg (4.5kg for heavy pendulums), Chime 3.4kg.
Gongs: 8-rod gong assembly - included.
Mounting: Cable suspension plate included in set.
Movement dimensions: RS
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RS005 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RS005 movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.
The RS005 116cm movement requires a distance of 1070mm from the centre of the dial to the centre of the pendulum bob, a minimum case width of 285mm to accommodate a 200mm bob and a depth of 140mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,084.76 (EUR 1,312.56)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 180mm.
Shell Fillings: Strike 3.4kg, Time 3.4kg (4.5kg for heavy pendulums), Chime 3.4kg.
Gongs: Nest of five Polished brass bells for RSB.
Mounting: Cable suspension plate included in set.
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RSB movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment.
Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent.
The RSB movement chimes the hours and plays the Westminster melody on the quarters, on a nest of five polished bells.
The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.
The RSB 116cm movement requires a distance of 1070mm from the centre of the dial to the centre of the pendulum bob, a minimum case width of 285mm to accommodate a 200mm bob and a depth of 140mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 110mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£999.00 (EUR 1,208.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Three 40mm x 245mm polished brass shells.
Shell Fillings: Iron; Strike 2.0kg. Time 2.8kg. Chime 3.0kg.
Gongs: 8-rod gong assembly - Included.
Mounting: Movement fixing screws and plates
Movement dimensions: SK
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The SK 116cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.
This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
The Timber pendulum (086) with a 165mm bob swings 210mm
The Lyre pendulum (095) with a 165mm bob swings 245mm
The Lyre pendulum (096) with a 220mm bob swings 270mm. The distance from the handshaft nut to the centre of the bob is 1040mm.
The weights need to be able to drop a minimum distance of 1328mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 140mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£480.00 (EUR 580.80)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 50 x 245mm.
Shell Fillings: Strike 3.0kg, Time 3.0kg, Chime 3.0kg.
Gongs: 8-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: RK Drawing
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The RK 047 movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes.
The movement plays the Westminster melody on the quarters on four rods of the gong.
The movement strikes the hours on four rods of the gong.
Patented Kienirramic solid anchor Dead Beat Graham escapement
Automatic tick (beat adjustment).
Two levers allow selection of Continuose, Automatic Night Silencing or Silent for the Strike and Chime.
Handshaft protrusion (movement front plate to tip, 35.8mm.
The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel.
For 8-day running the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm. The distance from the rear panel to the front face of the weight is approximately 140mm.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£799.00 (EUR 966.79)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Strike 3.0kg, Time 4.0kg (5.0kg for heavy pendulums), Chime 4.0kg.
Gongs: 12-rod gong assembly - included.
Mounting: Movement fixing screws and plates
Movement dimensions: KSU50 & 52
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The KSU 50, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.
This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm. The distance from the rear panel to the front face of the weight is approximately 185mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£1,046.38 (EUR 1,266.12)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Polished brass weight shell complete, 60 x 245mm.
Shell Fillings: Two lead fillings 58 x 240mm
Gongs:
Mounting: Movement clamp bars
Mounting: Cable hanging plate for HS movements
Movement dimensions: HS Com
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE comtoise, 116cm Pendulum & cable Movement with bim-bam striking on an 8-rod gong..
We can also supply this movement fitted with a single rear-mounted brass bell - please enquire.
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£645.00 (EUR 780.45)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Shell 60 x 245mm with large hook (Antique Brushed Brass)
Shell Fillings: Strike; 3.5kg. Time; 4.0kg
Gongs: 100mm diameter cast brass bell.
Mounting: Movement clamp bars
Movement dimensions: HE bell
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE BELL, 116cm Pendulum Chain Movement specifications; Half hour striking on a single rear mounted 100mm cast bell.
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£619.00 (EUR 748.99)
Please note that we ship to Canada, USA, Australia & New Zealand.
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The HE 011, 116cm Pendulum Chain Movement specifications; Half hour Bim Bam striking on an eight-rod gong
Specifications;
Movement plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,
This movement set requires a minimum measurement of 178mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the rear panel to the front face of the weight is approximately 170mm.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!
Price including UK delivery and VAT£665.00 (EUR 804.65)
Please note that we ship to Canada, USA, Australia & New Zealand.
