Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
BECAUSE EACH SET HAS TO BE ASSEMBLED FROM INDIVIDUAL COMPONENTS, ORDERS ARE TAKING UP TO THREE WEEKS TO PROCESS
There is also lots of interesting information on the Kieninger Manuals & Interesting Links page.
Plan 023 -- Shaker Table Clock
Enlarge | Shaker Table Clock, HEIGHT 432mm, Width 254mm, Depth 127mm. (Kieninger movement installation drawing included).
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet. |
Clockmakers Set 06 featuring the Kieninger JP 21cm movement (Kieninger supplied old stock)
Pendulum nominal length 21cm. Spring drives. 7 day running.
Plays the Westminster, Whittington and St. Michaels chimes on an eight rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
- Movement: JM 09 21cm Triple chime (Unused old stock direct from Kieninger) 1 available
- Dial: Kieninger Ø155mm diameter White Dial with black Roman numerals and an imitation brass rim.
- Pendulum: Kieninger 21cm Pendulum with 80mm bob
- Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
- Gongs: J series 8-rod gong - 140mm - rear mounting
- Movement dimensions: JP
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The JP clock movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, pendulum time regulation, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.
This clock movement is suitable for small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel.
Distance from the centre of the dial to the centre of the 80mm pendulum bob is approximately 117mm.
Total swing of the 80mm diameter bob is 85mm.
When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger clock movements. |
Price including UK delivery and VAT£714.55 (EUR 893.19)
Please note that we ship to Canada, USA, Australia & New Zealand.
Click here to view the Set 06 Movement Dials and Pendulums images page.
Click here to view the Set 06 Options and Prices page.
Clockmakers Set 09 featuring the Kieninger APL 29cm movement
Pendulum nominal length 29cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
- Movement: APL 29cm (no seconds
- Dial: Oakside 155mm round Roman dial.
- Pendulum: Kieninger 29cm Pendulum with 80mm bob
- Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
- Gongs: APL 5-rod gong, 180mm rear panel mounting.
- Mounting: Rear mounting Pillars (4) APL
- Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
APL 29cm movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 29cm movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum and 80mm bob the distance from the hand-shaft to the centre of the bob is 170mm and the total swing is 100mm.
The APL 29cm is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements. |
Price including UK delivery and VAT£499.00 (EUR 623.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Click here to view the Set 09 Movement Dials and Pendulums images page.
Click here to view the Set 09 Options and Prices page.
Clockmakers Set 11 featuring the Kieninger APL 35cm movement
Pendulum nominal length 35cm. Spring drives. 7 day running.
Plays the Westminster melody on a five rod gong.
THIS MOVEMENT SET IS IDEAL FOR SMALLER WALL CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
- Movement: APL 01 - 35cm
- Dial: Oakside 155mm round Roman dial.
- Pendulum: Kieninger 35cm Pendulum with 80mm bob
- Pendulum parts: Pendulum leader 104mm. (PL 21cm to 72cm movements)
- Gongs: APL 5-rod gong, 180mm rear panel mounting.
- Mounting: Four pillars connect to the rear panel of the clock - included.
- Movement dimensions: APL
Please note that all metal dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.
The APL movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.
This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.
When using the Square brass rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 315mm and the total swing is 145mm.
When using the Metal Grid pendulum with the 80mm bob the distance from the hand-shaft to the centre of the bob is 330mm.
The APL is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements. |
Price including UK delivery and VAT£499.00 (EUR 623.75)
Please note that we ship to Canada, USA, Australia & New Zealand.
Click here to view the Set 11 Movement Dials and Pendulums images page.
Click here to view the Set 11 Options and Prices page.