Kieninger Clock Movement Sets for Clock Makers who insist on the Best!
Please Note that parts on this page are only available by internet order - We are pleased to provide telephone or e-mail advice to clock makers but we cannot offer pay and collect.
On the Sets 'Options & Prices' page you can modify the contents of the set to suit your project! We also include a drawing showing the primary movement, dial and pendulum, installation dimensions. Oakside will remove the moon arches from all 250mm & 280mm moon dials to provide 250 & 280mm square versions.
On the Clock Case Hardware page you will find a selection of useful items, including brass rebate hinges, mortise locks, escutcheons, keys and adjustable cabinet leveling feet for your clock. Oakside use these items on its range of clocks!
Please note, when you purchase your mechanical clock parts from Oakside, you are dealing with a dedicated Longcase Clock Designer & Maker, not just a shop! We will readily examine you clock drawings to ensure that your design will be able to accommodate the Kieninger movement of your choice. We will also provide telephone assistance when you are installing the mechanicals and commissioning your clock. Our expertise will ensure that your new clock will perform perfectly!
CLOCK PLANS. On the Options and Prices page of each of our Sets you will find a selection of clock plans that Frank has purchased from around the internet; these can be modified to accommodate your project.
If this is your first Grandfather clock building project Frank recommends you have a look at our Clocks Built By Others page for inspiration, especially the clock by Pieter van Vliet of Canada - visit his web site and you will find a complete set of plans and fully illustrated guide to building a clock in the style of our Hampshire & Winchester with photos of each stage of construction.
BECAUSE EACH SET HAS TO BE ASSEMBLED FROM INDIVIDUAL COMPONENTS, ORDERS ARE TAKING UP TO THREE WEEKS TO PROCESS
American Grand Daughter Clock. Circa 1750. Height 1510mm Width 362mm, Depth 212mm
This design is based on a clock by Thomas Claggett, Newport, USA circa 1725/1750.
The plan consist of only two sheets.
Sheet one is an outline drawing showing only the principal dimensions so a builder will need to decide how to size all panels and jointing methods but we think biscuit jointing would be perfect.
Sheet two shows all sections and mouldings with dimensions.
We have a Kieninger Dial that fits the RWS movement; it is 200mm square with a moon arch 75mm radius at that top making the total heath 275mm. The original dial door will need to be modified to accommodate this dial.
As the cabinet is very narrow, please order pendulum 083 and we will supply a carbon fibre pendulum shaft with a brass cylindrical bob.
All of the Movement, Dial and Pendulum Sets listed on this web page can be installed in a clock cabinet built to the selected plan, however you must compare the dimensions stated on the Kieninger movement instalation drawing we provide and decide if you need to make changes to any of the plans cabinet dimensions prior to constructing the cabinet.
Clockmakers Set 32 featuring the Kieninger PS 057, 80cm Vienna movement
Pendulum length 80cm. Cable & Weight Drive.
Chimes the hours and 1/2 hour on a coiled gong.
THIS MOVEMENT SET IS IDEAL FOR LARGE WALL CLOCKS OR SMALL FLOOR CLOCKS. (Movement in stock)
The standard set includes the following parts: You can modify the Sets contents on the Options and Prices page!
Movement: Kieninger PS 057 - 80cm.
Dial: Oakside 180mm diameter white dial with black Roman numerals, a subsidiary seconds dial and a brass rim.
Pendulum: Kieninger 80cm Timber Pendulum with a 140mm Brass Bob. 19mm wide stick
Weight Shells: Two - 50mm x 160mm with small hooks
Shell Fillings: Two lead @ 3.1kg. 48mm x 160mm
Gongs: 133mm Coil gong Kieninger PS
Mounting: Cast Brass Mounting Bracket with fixing screws and Cable suspension plate.
Movement dimensions: PS
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Over swinging the pendulum will automaticaly correct the tick (beat).
A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS movement chimes the hours and strikes on the half-hour on a round gong.
The PS 80cm movement requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel;
To achieve eight-day running the weights need to be able to drop 760 mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.
When using the grid pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 720mm. The swing is about 200mm.
The distance from the rear panel to the front face of the weight is approximately 100mm.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.
Price including UK delivery and VAT£835.91 (EUR 1,044.89)
Please note that we ship to Canada, USA, Australia & New Zealand.
Weight Shells: Two - 50mm x 120mm with large hooks
Shell Fillings: Two lead @ 2.0kg.48mm x 120mm
Gongs: 8-rod gong assembly - included.
Mounting: Cable suspension plate included in set.
Movement dimensions: RWS
Please note that all metal dials are supplied fitted to a back plate with four pillars - these pillars connect directly to the front plate of the movement, ensuring accurate positioning.
The RWS 25 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Over swinging the pendulum will automaticaly correct the tick (beat). Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.
The RWS 25 - 80cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel.
To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet.
When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.
When using the grid pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 720mm. The swing is about 200mm.
The distance from the rear panel to the front face of the weight is approximately 120mm.
The Dial, Hands and Movement are supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.
Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.
PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements
Price including UK delivery and VAT£899.76 (EUR 1,124.70)
Please note that we ship to Canada, USA, Australia & New Zealand.
